1.Data Requirement

3D model data of tiled osgb format (regular or adaptive tiles, Quadtree LOD structure)

2.Parameter Setting and Output Operation Steps

2.1 Coordinate system and tile specifications setting, you can set the tile size in regular or adaptive mode, ensuring the output tile size is suitable to the computer configuration.

1.png

2.2 Data format setting, select OSGB format and Quadtree type for LOD

图片2.jpg

2.3 Choose the same coordinate system as specified in 2.1.

图片3.jpg

2.4 Review Output Data

图片4.jpg
图片5.jpg

2.5 Compress the Files

图片6.jpg
Compress both the Data file and metadata file into a zip file, as shown above.

3.Upload to Altizure.com

3.1 Create Project

Click Create on the Altizure Home.
1573453219.jpg

Select Third-party Model and click Start Creating.
图片9A.png
Select Photogrammetric Model and click Create.
图片10A.png

3.2 Upload the Compressed File

Click to select your file e.g. Data.zip and upload.
图片11.png

3.3 Start Conversion

After uploading, click to start the conversion. Upon completion of the conversion, the model can be viewed.